ARAM2000
OVERVIEW:
The BLX185 150A waterproof ESC provides consistent power control and is 6S LiPo ready.
Fitted with super-reliable XT-90 connectors and sporting a built-in cooling fan for reduced heat during intense driving action, the BLX185 ESC has over voltage protection, and a two-stage LiPo cut off for added cell management.
The fitted 10AWG high-quality wires and 6V BEC unit are combined with a three mode throttle profile (FWD/REVERSE/BRAKE) to provide the ultimate driving experience.
Recommended battery specification: 5000mAh - 35C minimum - Per battery pack
3S, 4S and 6S LiPo Compatibility
BLX185 SPECIFICATIONS |
|
| POWER TYPE | BLX Brushless Extreme Performance |
| ESC TYPE | 150AMP Continuous current capacity |
| BATTERY USAGE | 3S LiPo (11.1), 4S LiPo (14.8) or 6S LiPo (22.2V) Stick Pack |
| LOW VOLTAGE CUT-OFF (LVC) | 3.2V per cell |
| THERMAL PROTECTION TEMPERATURE | 105°C / 221°F |
| OVER-VOLTAGE PROTECTION | Over 6S LiPo (25.2V) |
| BEC VOLTAGE | 6V |
| BEC CURRENT | 3A |
| ESC LENGTH | 57.5mm / 2.26" |
| ESC HEIGHT | 38.9mm / 1.53" |
| ESC WIDTH | 59.5mm / 2.34" (Including hold-down tabs) |
| ESC WEIGHT | 196g / 6.91oz |
| RECEIVER WIRE LENGTH | 200mm / 7.87" |
| BATTERY WIRE LENGTH | 165mm / 6.5" |
| MOTOR WIRE LENGTH (INCLUDING CONNECTOR) | 130mm / 5.12" |
| SWITCH LENGTH | 29.3mm / 1.15" |
| SWITCH WIDTH | 12.8mm / 0.5" |
| SWITCH HEIGHT | 18mm / 0.71" |
| MOTOR BULLET CONNECTOR SIZE | 4mm / 0.16" |
| WIRE SPECIFICATIONS | 10AWG |
| ESC BATTERY CONNECTOR TYPE | XT90 |